MOL MS 20A Минеральное масло
Преимущества продукта
- хорошая окислительная и термическая стабильность
- низкая склонность к образованию кокса и других отложений
- отличные вязкостно-температурные характеристики
Применение
MOL MS 20A минеральное масло с высокой вязкостью. Применяется для смазывания газовых и воздушных компрессоров высокого давления и с высокой рабочей температурой. Recommended for use in reciprocating compressors delivering and compressing air and other inert gases (e.g. nitrogen and hydrocarbon derivatives) not used as refrigerating medium up to 160°C discharge temperature (in case of mobile compressors up to 220°C). MOL MS 20A может использоваться для смазывания поршневых двигателей малой авиации. MOL MS 20A не применяется для смазывания компрессоров, работающих с кислородом, хлором и агрессивными газами!
Спецификации и одобрения
ISO-L-DAA DIN 51506 VB DIN 51506 VC
Описание продукта
MOL MS 20A производится из высокоочищенных минеральных базовых масел и содержит противопенные присадки и присадку снижающую температуру застывания. MOL MS 20A обладает хорошей окислительной и термической стабильностью, малой летучестью, соответствующими вязкостно-температурными характеристиками и низкой склонностью к пенообразованию. MOL MS 20A обладает низкой склонностью к образованию отложений, что позволяет использовать данный продукт как компрессорное и как моторное масло для поршневых авиационных двигателей. Typical properties
Properties |
Typical values |
Density at 15°C [g/cm3] |
0,901 |
Kinematic viscosity at 40°C [mm2/s] |
282 |
Kinematic viscosity at 100 °C [mm2/s] |
20,94 |
Viscosity index |
88 |
Flash point (Cleveland) [°C] |
290 |
Conradson carbon residue [%(m/m)] |
0,30 |
Sulfur content base oil (RFS) [%(m/m)] |
0,98 |
Pour point [°C] |
-18 |
Storage and handling instructions
Store in the original container in dry, properly ventilated area. Keep away from direct flame and other sources of ignition. Protect from direct sunlight. During transport, storage and use of the product follow the work safety instructions and environmental regulations relating to mineral oil products. For further details please read the Material Safety Data Sheet of the product. Engine oils are finished lubricant formulations where additional additives are unnecessary and may result in unforeseeable adverse effects. The manufacturer and distributor shall not be held liable for such possible damages. In the original container under the recommended storage conditions: 60 months Inflammability hazard: Grade IV. Recommended storage temperature: max. 40°C
|